AP100 v3.4 Installation Procedure

AMADA SOFTWARES
Typography
  • Smaller Small Medium Big Bigger
  • Default Helvetica Segoe Georgia Times

Note on Installation


Following notes affect the installation, so please take notice of them.

  • When selecting PCL AP100 at "Add/Remove Application" in control panel, the following dialog might be displayed depending on an installed environment.
    In such case, insert the AP100 CD-ROM into the CD-ROM drive, and then execute the file \AP100\Setup.exe.
  • To newly install PCL AP100, fix the respective capacities for each drive as shown below.
    Besides, following values are just indications, so they can be increased according to environments.

Software C: D: E:
AcrobatReader 5 16 0 0
MSDE 35 0 0
SQL Server 7 Service Pack 4 46 0 0
CAM Database Module 74 0 0
AP100 468 1 414
       
Total used capacity of AP100 Server 639 1 414
(Unit: Megabyte)
Besides, to execute an installation, the capacity with about 200 megabytes is required in a drive in which Windows system is installed, during executing the installation.
  • To install and upgrade version of PCL AP100, the capacity with greater than or equal to 70 megabytes is required.
    However, the needed free capacity might be increased according to environments.
  • Please perform CamDB\osuninstall.bat before uninstalling CAM Database Module (ObjectStore), when you have upgraded from AP100 version 3.20.01.
  • Please uninstall MSDE before uninstalling AP100.
  • Please initialize SQL Server before uninstalling PCL.
  • AP100 New Installation


    Patch program for each software might be bundled. 
    If there is a file in \patch folder in CD-ROM, please install the patch program after all installations of AP100 are complete.

    Execute the installation of AP100 in the following sequence.

    Windows 2000


    Please install Microsoft Windows 2000 Professional and Windows 2000 Service Pack 4 as an operating system.

    Note!
    • Enter Computer Name and Work Group Name within 10 alphanumeric characters (A to Z, and 0 to 9) with 1 byte.
    • Set the system so that User Name and Password should be entered when logging on. (Do not set the system that is logged on with the specific user name.)
    • Add NetBEUI into Network Protocol.
    • Construct drives in AP100 server as C: Greater than 4 gigabytes. (Greater than 6GB is recommended.) and D: 2 gigabytes.
    • Fix greater than 2 gigabytes in capacity for the drive in which AP100 Client is installed.

    Dongle driver installation


    Log on Windows with the account of Administrator.

    Start \Drivers\Dongle\Setup\Setup.exe in AP100 CD-ROM.

    Select a "Kernel-mode" radio button.
    Click "Install" button.

     

     

    Ảnh gốc tại www.metalforming.vn

    Click "Yes" button.
    Then, restart your computer.

     

    Install CAM Database Module

     


     

    Log on Windows with the account of Administrator.

     

    Execute the file \CamDb\Install.exe in AP100 CD-ROM.

     

    The dialog [Install] is displayed.
    Press [Start] button.

     

     

     

     

    Ảnh gốc tại www.metalforming.vn

    Execute copying a file.
    Please wait awhile.

    The message to tell the completion of installation is displayed.
    Press [Finish] button.

     

     

    Ảnh gốc tại www.metalforming.vn

    Then, reboot your computer.

    Now, CAM database module has been completely installed.

    MSDE Installation


    Note that this installation is only for AP100 Server.

    Log on Windows with the account of Administrator.

    Start \Msde\Setup.exe in Service Pack CD-ROM.

    A dialog to select the drive to install is displayed.
    Enter the drive name for installation, and then click OK.

     

     

    Ảnh gốc tại www.metalforming.vn

    Now, it's starting to extract compressed file which is necessary for setup program in installation.
    Please wait awhile.
    The installation is continuously starting.
    Please wait awhile.
    A dialog to show the completion of installation is displayed.
    Click OK.
    Then, reboot your computer.

    SQL Server 7 Service Pack Installation


    Note that this installation is only for AP100 Server and PCL Server.

    Log on Windows with the account of Administrator.

    Start \sql7sp\Setup.bat in Service Pack CD-ROM.

    A "Welcome" dialog is displayed.
    Click Next.stalled.

     

     

    Ảnh gốc tại www.metalforming.vn

    A "Software License Agreement" dialog is displayed.
    Read the License Agreement, and then click Yes.
    A "Connect to Server" dialog is displayed.
    Select a "The SQL Server system administrator ..." radio button.
    If PCL/AP100 is already installed, input "sqladm1" into a password.
    However, Type no password, if PCL/AP100 is not installed yet.
    Click Next.
    A "Start Copying Files" dialog is displayed.
    Click Next.
    Now installation is starting.
    Please wait awhile.
    An "Authentication Mode" dialog is displayed.
    Select a "Mixed Mode" radio button, and then turn on the "Blank Password" radio button.
    A dialog to show the completion of installation is displayed.
    Click Finish.
    Then, restart your computer.
    Now, SQL Server 7 Service Pack is completely installed.

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

    Logon to Windows with the account of Administrator.

    Start \Ap100\Setup.exe in AP100 CD-ROM.

    A dialog to confirm the start of installation is displayed. 
    If there is no problem, click Next.

    A dialog to enter the user info is displayed. 
    Enter the User Name and Company Name, and then click Next.

    A dialog to type a folder name for installation is displayed.
    Enter the folder name, and then click Next.
    A dialog to select a setup type is displayed. 
    Click the setup type, and then click Next.
    If AP100 Server is selected, a dialog to type the drive where data will be saved is displayed.
    Enter the drive name, and then click Next.
    Copying file is starting, and a dialog to show the progress info is displayed.
    Please wait awhile.
    A dialog to show the completion of installation is displayed.
    Click Finish.
    Now, AP100 is completely installed.

     

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

     

     

     

    Ảnh gốc tại www.metalforming.vn

    NC Data Input/Output Setting


    Log on Windows with the account of Administrator.

    Select [Control Panel] in the following sequence from the button Start on a taskbar. [Start] -> [Setting] -> [Control Panel]

    Select the icon [Management Tool] in the control panel.

    Select the icon [Service] in the Management Tool.

    Select [Network DDE DSDM] from a list in the window [Service], and then select [Properties] from [Operation] in the main menu.

    Select [Automatic] from the combo box [Startup Type].

    Press [Start] to start Network DDE DSDM services.

    Press OK to close a dialog box.

    Execute the file \Asis1v11\Bin\SddIoNdde.exe in the drive where PCL or AP100 is installed.

    Then, reboot a computer.

    Now, NC Data Input/Output setting has been completed.

    User Environment Setting


    Log on Windows with the user account for executing PCL or AP100 (the account is normally same name as computer name).

    If some applications of PCL or AP100 are activated, close all of them.

    Select [Specify file name and execute it.] from the start menu.

    Enter C:\Asis1v11\Bin\Tool\ApEnvNew.exe ("C:" means name of drive where PCL/AP100 is to be installed.) in the dialog box [Specify file name and execute it.], and press OK.

    The dialog of User Environment Setting Program is displayed.
    Press NEXT.

    Installing PCL Client or AP100 Client displays the dialog to enter server name to be connected.
    Enter the computer name of PCL Server or AP100 Server to be connected, and press NEXT.

    The dialog to tell the completion of environment setting is displayed.
    Press Complate.

    Now, User Environment setting has been completed.

    Register License


    Insert a FD, where a license file is already saved, into a drive.

    Select [Register] in the following sequence from start menu on desktop, and start up License Registration Tool.
    [Start] -> [Program] -> [ASIS100PCL] -> [License Management] -> [Register]

    Follow the indication in the display [License Registration Tool], and register license of PCL/AP100 onto computer.

    Select [Monitor License] in the following sequence from start menu on desktop, and start up License Monitor Tool.
    [Start] -> [Program] -> [Startup] -> [Monitor License]

    Windows XP


    Please install Microsoft Windows XP Professional and Windows XP Service Pack 1a as an operating system.

    Note!
    • Enter Computer Name and Work Group Name within 10 alphanumeric characters (A to Z, and 0 to 9) with 1 byte.
    • Construct drives in AP100 server as C: Greater than 4 gigabytes. (Greater than 6GB is recommended.) and D: 2 gigabytes.
    • Fix greater than 2 gigabytes in capacity for the drive in which AP100 Client is installed.
    • Suspend "simple file sharing".

    Dongle driver installation


    Log on Windows with the account of Administrator.

    Start \Drivers\Dongle\Setup\Setup.exe in AP100 CD-ROM.

    Select a "Kernel-mode" radio button.
    Click "Install" button.

     

    Ảnh gốc tại www.metalforming.vn

     

    Click "Yes" button.
    Then, restart your computer.

    Install CAM Database Module


    Log on Windows with the account of Administrator.

    Execute the file \CamDb\Install.exe in AP100 CD-ROM.

    The dialog [Install] is displayed.
    Press [Start] button.

     

     

    Ảnh gốc tại www.metalforming.vn

     

    Execute copying a file.
    Please wait awhile.

    The message to tell the completion of installation is displayed.
    Press [Finish] button.

     

    Ảnh gốc tại www.metalforming.vn

     

    Then, reboot your computer.

    Now, CAM database module has been completely installed.

    MSDE 2000 Installation


    Note that this installation is only for AP100 Server.

    Log on Windows with the account of Administrator.

    Start \Msde2k\_install_msde2000.bat in Service Pack CD-ROM.

    The installation is continuously starting.
    Please wait awhile.

    Reboot your computer.

    MSDE 2000 Service Pack Installation


    Log on Windows with the account of Administrator.

    Start \Msde2kSp\_install_MSDE2000SP4.bat in Service Pack CD-ROM.

    The installation is continuously starting.
    Please wait awhile.

    Reboot your computer.

    Logon to Windows with the account of Administrator.

    Start \Ap100\Setup.exe in AP100 CD-ROM.

    A dialog to confirm the start of installation is displayed. 
    If there is no problem, click Next.

    A dialog to enter the user info is displayed. 
    Enter the User Name and Company Name, and then click Next.

    A dialog to type a folder name for installation is displayed.
    Enter the folder name, and then click Next.
    A dialog to select a setup type is displayed. 
    Click the setup type, and then click Next.
    If AP100 Server is selected, a dialog to type the drive where data will be saved is displayed.
    Enter the drive name, and then click Next.
    Copying file is starting, and a dialog to show the progress info is displayed.
    Please wait awhile.
    A dialog to show the completion of installation is displayed.
    Click Finish.
    Now, AP100 is completely installed.

    Sign up via our free email subscription service to receive notifications when new information is available.